Last Post 07 Jan 2020 02:46 PM by  Christopher Satkowski
gps Ingress Point and Center of Claim
 4 Replies
Sort:
You are not authorized to post a reply.
Author Messages
PETE KOTTKE
Greenhorn
Greenhorn
Posts:17



--
01 Jan 2019 04:35 PM
    Perhaps some of my veteran prospectors can help me.
    The claim page gives me two gps coordinates (center and ingress points) How do I find the other 3 corners? I don't want to cross over into someone else's claim or private property.
    Here is a claim I am interested in going to this month - GOLD PROSPECTORS 1, 2 & WARRIOR
    I can get my hands on a GPS unit if it makes it easier.
    PETE KOTTKE
    Greenhorn
    Greenhorn
    Posts:17



    --
    02 Jan 2019 12:42 AM
    My apologies. The handbook has all the coordinates I need.
    Chad Snyder
    Greenhorn
    Greenhorn
    Posts:2



    --
    05 Jan 2020 04:29 AM
    Hello,
    Maybe I can help out the new people who don’t know about placer claims and how they are orientated. The GPAA center coordinates is where you should find the “monument marker” this is the center of the claim. Most claims today are orientated either N to S or E to W. This is to avoid overlapping claims. On some/most/but not all placer claims the monument maker tends to be closer to the northern boundary. A placer claim is 660’ wide X 1320’ long, so from the monument marker the boundary is 330’ E to W and 660’ N to S..( if the claim orientation is N to S and the claim marker is in the center). If it’s farther north than simply look 300’ on either side of it and you should find them fairly easy. Hope this helps.
    Serhiy Ivanov
    Greenhorn
    Greenhorn
    Posts:7



    --
    07 Jan 2020 11:14 AM
    I've been there two days ago. Beware of ticks! I spent an hour or so walking down the stream (trailhead at picnic area) and didn't reach the center of the claim. Picnic area was closed due to fire hazard, including parking.
    This claim is marked on this map, but I'm not sure how accurate it is
    https://thediggings.com/usa/california/san-diego-ca073/map
    Christopher Satkowski
    Highbanker
    Highbanker
    Posts:112



    --
    07 Jan 2020 02:46 PM
    As far as locating the corners, if you can't find the corners on the GPAA site or book, the only thing you can do is get the surey from the county. Each county is different.

    -In Yavapai county, you can search a township, range, and section for mining claims, and then easily find the survey and download it.
    -In Maricopa county its a lot harder. You have to search the entire county for mining claims, manual look through hundreds or thousands of them until you find the name. If you go to mylandmatters.org, you can find who the claim onwer is, and then search for Maricopa county records by last name for mining claims, and then download the correct one.

    After that I go to a map like is on mylandmatter.org, or the BLM LR2000 site, and drop a pin on that cornmer to get a GPS. Unless the person has misfiled the claim, which happens, then that takes me to where I can see a corner marker. There's something like 8 X 8 or 64 standard places a corner marker can go, but they don't have to, for example claiming nect to private property, claiming next to patented land, claiming next to an add shaped lode claim. Land Matters and the BLM data will tell you a claim is in the section, but does not give you where in that one mile quare area its located. There's other ways to get Lat Long for a corner of a PLSS survey including county maps, GPS downloadable overlays, or even plotting them off a paper map (not fun).

    At least locally, a location monument isn't really used, it s but they build the monumnet on the corner of the claim.

    Also, a 20 acre claim is usually to the dimensions you mentioned, but there's plenty of 40 acre 1320 X 1320 claims, and then 2640 X 2640 160 acre claims, plus a few odd L shaped or other rectabgular claims. A few people have done other size claims.
    You are not authorized to post a reply.