Member since August 1995

Profile

Photos

Relationships

Videos


Not a Chapter Member

Friends

Total (0)   -   View All
Loading ....Loading ....
Likes

Attending

Photos

Friends

JEFF W HIGGERSONreplied to: RE: Breaking up caliche

use a metal detector looking for the bigger piece and let the caliche gods have the rest

1 week ago

JEFF W HIGGERSONreplied to: RE: Leveling the Keene 2" Gold Buddy Dredge

If I don't find any gold in the last 1/4 of the box then I doing good if you got gold going past the third riffle that is OK the sluice is long for a ...

3 months ago

JEFF W HIGGERSONreplied to: RE: Length of Classifier plate

you should have about 2 to 3in of water running fast enough to wash all your rock down the box and off the end so it sounds like you are running your ...

3 months ago

JEFF W HIGGERSONreplied to: RE: Length of Classifier plate

I cod not find a good photo of the punch plate but there was one that was good enough it looks like there is a rib in the middle and there should be r...

3 months ago

JEFF W HIGGERSONreplied to: RE: Leveling the Keene 2" Gold Buddy Dredge

don't know how much cons you end up with I wood end up with about a 5 gallons bucket full at the end of a day or a week with a keen 8" industrial dred...

3 months ago

JEFF W HIGGERSONreplied to: RE: Length of Classifier plate

does your punch plate have sides on it to hold it above the riffle and maybe a rib down the middle? it sounds like you got it upside down maybe a phot...

3 months ago

JEFF W HIGGERSONreplied to: RE: Length of Classifier plate

does this dredge have a crass box or a flare tube and if it has a flare tube then the down bend of the punch plate should be in front and down to make...

3 months ago

JEFF W HIGGERSONreplied to: RE: Leveling the Keene 2" Gold Buddy Dredge

try to run the pump at 1/2 to 3/4 wide open and set the angle of the dredge so you are not blowing out the good stuff and then you control how much ma...

3 months ago

JEFF W HIGGERSONreplied to: RE: Length of Classifier plate

don't run the plate to the end the rocks will not knock out the gold and if your plate has a bend going up then turn your plate so the bend is going d...

3 months ago

JEFF W HIGGERSONreplied to: RE: Leveling the Keene 2" Gold Buddy Dredge

if you run your dredge to slow you will get more cons but you are probable blinding the riffles if it got them or does it got expanded metal for riffl...

3 months ago

JEFF W HIGGERSONreplied to: RE: Need some advice.

you can go to a bigger pump and motor or you can put another power jet around 25ft. down the line and run other pump and motor and you might have to d...

3 months ago

JEFF W HIGGERSONreplied to: RE: Low Visibility

when you dredge in low to no visibility you have to use your other sense to be safe like feeling with your hands or most of all your hearing, so ...

2/26/2017

JEFF W HIGGERSONreplied to: RE: New dredge!

it looks like a Keene 3" or 4" crash box you can see yellow pontoon just on the right side of the photo maybe it is a good dredge.

2/15/2017

JEFF W HIGGERSONreplied to: RE: Coastal Dredging: Idle Thoughts

The first thing you should do is go ask the fish and game if they will give you a special permit to dredge there and if so how much. and the rogue riv...

12/7/2016

JEFF W HIGGERSONreplied to: RE: what claim to visit out west from the mining guide ?????????

Thinks, three years, that was I was thinking, but I was not positive.

4/26/2016

JEFF W HIGGERSONreplied to: RE: what claim to visit out west from the mining guide ?????????

How can I buy a GPAA 2016 mining guide?

4/24/2016

JEFF W HIGGERSONreplied to: RE: Dredge Adjustments

This is what Keen uses for there 4" dredge it should be close for all and it does not heart to have the sluice box end in the water you should go...

1/13/2015

JEFF W HIGGERSONreplied to: RE: Miners moss VS Carpet?

you should use carpet under the moss when ever you have the room the moss does not have a backing and so the fine gold will keep moving if you have ca...

1/12/2015

JEFF W HIGGERSONreplied to: RE: Advice on Gold King 3" dredge

go to this link http://gpex.ca/smf/index.php?topic=10347.0 and you can see how much he is selling his stuff for and if you look at the photo you ...

1/4/2015

JEFF W HIGGERSONcreated the topic: Need dimensions of the new keene 8" over size power jet

I posted this post in the prospecting tips and I think it wood be better here

10/6/2014

JEFF W HIGGERSONcreated the topic: Need Keene 8" oversize power jet dimensions

I would like the dimensions of the new keene 8" over size power jet to check it with the old one if any one has them like the OD and ID of t...

10/5/2014